In This Post, we will discuss How to setup and configure Belkin range extender.
Before we proceed further let us Tell You few facts About the Belkin range booster (Extender). Belkin extender is One of the best Range extenders if You value In Terms of Speed, connectivity, Durability altogether.
Most Belkin wireless extenders have dual band Feature Available. You Don’t Need to make the same password as you have on your router. You Can Setup Different password in Your Belkin extender.
Setting Up Belkin Extender Can Be super simple Because It’s A Plug & Play Device. Let’s Just Go And Configure Belkin Range extender –
Setup Belkin Range Extender
In Order to set up Belkin Range Extender, You Just Need to Follow Few Steps And Get it Setup
1- First Power On Your Belkin extender And Plug it to Some power Source Near to Your Main Router.
2- Now Go to Your Computer And Please Refresh the Network List At Right Hand Bottom Of Your Computer
3- If Your Computer Does Not have Wireless Capability You Can Use an Ethernet Cable to Connect the Belkin extender with Your computer.
(Keep In Mind that Extender Con Be Setup using Any Device With Browser With Wifi Capability Without Any Ethernet Cable- Example – Android, Windows Phone Or iPhone, iPad, tablet, etc.
4- Now You May Can See a Network name Belkin.setup To Your Network List Please Connect with it.
5- We Are Much Sure While Connecting With Belkin.setup it should Not Ask for any password as it Should Be Unsecured In The Beginning But You Can Reset the extender if it shows Password On It.
6- Now Open Your Internet Browser at Your Device Which is connected with Your Belkin Extender And Type at the Top Belkin.range Or http://Belkin.range And Press Enter.
7- Now Start setting Up Belkin extender And Follow Onscreen Instructions setup password, Network name, Guest Network And Password (Optional).
8- You Can Turn On And Turn off Bands. What we mean is Frequency.
For Gaming Devices Like Xbox And Roku, You might need 5GHz signal For Rest of the devices 2.4 GHz is Fine. You Can Turn Both On And Functional at the same time if you Belkin extender Model Supports Dual band.
Please Save the settings And Reboot Your Computer And Belkin extender.
Now Your Belkin Range Extender Has Been Configured And Its Time You Go And Test the Connection.
You Can Also Use WPS Key to Setup Your Belkin Extender.
If You Fail To Setup Belkin extender setup Please Restart Your Computer And Reset the Extender Try Installing Your Range Extender.
Reset Belkin Extender
Its Quite Easy Just Follow the steps –
Plug the Extender to the Power & Press the Reset key at the Back of Belkin extender using a Paper-Clip Or Pen & Hold if for 5-10 Seconds, When all lights on the Belkin extender start Flashing Let the Reset Key Go. Now is the time for You to Go & Re-setup the Belkin extender All over again. Don’t Forget to Power Cycle Your devices After Restart.
Read More on How to Reset & Setup Belkin Range Extender
We Hope all this Information May Help You Setup And Troubleshoot Belkin extender.