How to Login Arris Wireless Router(Modem)?

Arris has been making mostly cable modems before this product. 

They have been selling cable modems for over 60 years now. It is the same company that invented digital TV and brought the wireless internet into homes with their first cable modem gateway. Their modems provide exceptional download speeds that allow faster downloads, HD video streaming without buffering, online gaming with zero latency, etc. 

They provide enhanced safety features to keep your network safe and secure and provides ultimate surfing experience. Let’s talk about how to set up the router, login into your web portal and various other settings.

Connecting your router to your computer

In order to connect your router with your computer, use the Ethernet cable provided inside the box. You need to connect one end of the ethernet cable to your computer’s Ethernet port and one end to the port in your modem

Login Arris Wireless Router –

Step 1. Open up your browser (Google Chrome, Firefox, Microsoft Edge). 

Step 2. Enter your IP address in the address bar, which in your case will be 192.168.0.1 or 192.168.100.1 (if it does not work, your IP, username, and password will be provided on the backside of the modem). 

A login prompt will pop-up, It will ask you for Username and Password. By default, the username and password will be “admin” and “password” respectively. 

If these credentials don’t work, try the following credentials. 

Username Password 

admin admin 

admin 1234 

admin blank 

blank blank 

If the problem persists, try restarting your modem and try logging in again. 

Note: These credentials may not work if your service provider has changed it. You will have to contact your service provider in that case. Source of the information – arris router login

Can’t Log In, What to do?

If you fail to login or you are facing problems with bandwidth, you don’t need to panic because just by resetting your modem to default settings will help you proceed further. 

It will restore the settings of your router to the default as it came out of the box. 

After resetting, your login or bandwidth problem should be fixed. Now try logging in with the default username and password. (written on the box or on the back of the modem)

How to Factory Reset Arris Wireless Router?

Note: Resetting your modem will wipe all your settings like network name and password. 

There are two ways by which you can reset your wireless router. Let’s go through them one by one: 

Using Reset Button 

Generally, at the backside of your modem, there should be a reset button. 2. When you locate the button press and hold the reset button using a pointed object like a 

pen or paper pin. 3. Hold the reset button for 12-15 seconds. Doing this will make your router reboot. 4. When the router reboots, it means that the router has been restored to factory settings.- 

This may take a few minutes. 

Even after completing all the steps above, if you are unable to reset factory settings, then try the second method given below: 

 Reset using the web interface 

You can log in to your Arris wireless router by going to one of the following addresses: 

a. http://192.168.100.1

b. http://192.168.1.1

c. http://192.168.254.254 2.

  • Go to the section named as Security or Utilities (the name of this tab can vary model to model)
  • Look for the option to factory reset the device to default settings and click on it to begin the process.
  • Wait a few minutes for your modem to reset. 

Congratulations your router has now been reset to default settings. What next, you ask? 

Now as your router is back to default settings, you will have to set it up for your own use, so let’s talk about that next. 

Setting up Initial Wireless settings

For setting up the wireless settings of your modem, you need to log in to the web portal as mentioned above. 

It will ask you for the username and password and you can use the default ones as explained above. After you’ve successfully logged in, do the following steps: 

Step 1. Ensure to check Enable Wireless checkbox. 

Step 2. Choose an easy name for your network (that you can easily remember) and put that name in Wireless Network Name(SSID) 

Step 3. To make sure that your network is visible to connect, check the Broadcast Network Name(SSID) checkbox. 

Step 4. Set Tx Power Level to “High” for faster transaction speeds. 

Step 5. For Channel, choose “Auto”. 

Step 6. Choose your preferred language, by default, it will be “English”. 

Step 7. Choose the right security model for your network: Choose WPA-WPA-2PSK** as it is the most advanced security protocol available as of now. 

Step 8. Encryption Algorithm should be set to “TKIPAES”. 

Step 9. Setting up a password for your wireless network: To set a password for your network, type in your desired password in the Pre-Shared Key field. Try setting a difficult password for your network, but make sure to remember it. 

Step 10. Click on the WPS Enable checkbox to ensure the security of your network is active. 

Step 11.Go to Encryption Mode and set Encryption Mode to PBC. 

Step 12. Click the Apply Button. Your router should be successfully configured now. 

Note: Some devices may not be compatible with these settings, you may need to downgrade the security to WPA-PSK or WEP in order to support those devices. 

How to Reset Password on Arris Wireless Modem? 

Default passwords are often very easy and people can easily get access to your network. But you don’t want that, do you? So you need to change your password to add a little bit more security to your network. 

Note: You need to be connected to your network via an Ethernet cable or Wireless network. 

1. Login to your Arris wireless router using the web portal as explained before.

2. Search for Security settings(Location of these settings may vary for different models), 

Try to locate these settings in the sidebar.

3. Look for a Field named as “Pre-shared Key” 

4. Enter your new password in the “Pre-shared key” field.(try to make your password more

complex, but easy to remember).

5. You might be asked to enter your password again. 

a. Tips for setting a strong password 

i. Add special characters. ii. Use Upper case and Lower case characters. iii. Avoid Using Commonly used words. 6. Save your password by clicking on the “Save” button. After saving the changes, restart your device. 

FAQ

Does Arris Modem have Wi-Fi? Arris provides DOCSIS 3.0 standard, SURFboard WiFi cable modem that is perfect for streaming 4K Ultra-HD video content, virtual reality gaming with zero latency. 

How to Extend my Wi-Fi range? 

● Select a Good Place to put your modem. 

● Keep your router updated. 

● Cut Off unwanted connected devices. 

● Buy a Wi-Fi repeater/Extender. 

● Try Switching WiFi channels. 

● Stop Bandwidth hungry apps and clients 

● Switch to 5GHz band. 

Conclusion 

After going through the instructions, it won’t be that hard for you to log in and configure the Arris Wireless router. We hope we helped you configuring the router and made the process a little easier for you. 

Leave feedback in the comments if we were able to help you. Also, If you have any questions regarding logging-in or setting up the router, feel free to ask in the comments. 


How to Login Any Wireless Router

Logging in to your router can be a hassle if you are a tech noob. I also had to face a lot of problems when I decided to log in to my router to change the password of my router or for something else.

First, let’s talk about why you would want to log in to your router:

1- to change the password of your router and the wifi internet.

2. To extend the existing network to cover a larger area with your wifi.

3. To change the QoS (quality of service) settings to allocate different bandwidth to different applications and devices.

4.  To use the Dynamic DNS feature to allocate a new address to your computer when you want to host a server.

5.   To access the web interface of your router.

6.  To check who all are connected to your router. This can be done by clicking on the “connected devices” button on the general status page.

7.   To change the DNS server for your entire network on your router.

8.   Routers have parental control features that allow website blocking for different devices. Then you can also control the timing when internet access is disabled for a particular device. This will help you to stop your child from using the internet late at night.

Now that we know why we would want to login to a router, let’s talk about how to login to routers like D-Link, Linksys, Belkin, Asus, and Netgear.  They have a login process which is quite similar. So if you follow the given process then you will be able to log in most of the routers.

login router Dashboard –

1: Connect the router to the computer using the Ethernet cable.

2:  Then open your favorite browser. It can be Google Chrome, Internet Explorer, Firefox or for that matter any browser you want.

3: In the address bar in your browser, enter the default IP address of your router. The default IP address of most of the routers is 192.168.1.1. Enter this IP address and press enter.

Question: How to find the default IP address of your wireless router?

Answer: Generally the default IP address of a router is 192.168.1.1 Or 192.168.0.1 If this doesn’t work, you can visit the website of your routers make, and directly get to the GUI of setup console page.

4:  Once you enter your IP address in the address bar of the router and press Enter, then a new page will open in the browser which will ask you to enter your username and password.

You can try this combination of username and password:

Username  =  admin  , Password = admin.

If even after using this combination you are not able to log in, that means that you must have changed the password and have forgotten it. Most routers don’t have the facility of recovering the lost password. But you can reset the router.

Resetting the password is the subject of a different article. It is a complex process. There are two ways called the Soft Reset and the Hard Reset. A soft reset is used when the password is being changed for the first time and the hard reset method is used when the password is being reset for the second or any number of times.

Now we know how to log in to a router. Now you can solve any problem you have related to your router by logging in and accessing the web interface of your router.

How to Login Netgear Wireless Router ?

Login Netgear Wireless Router

Hi Everybody

Today we Are Going to assist with Your Netgear Router And How You Can Login Netgear Router. Once Login You will be able to adjust the Netgear router settings. like password, network name, channel settings, parental control etc.

As by an automatically(default), each and Every NETGEAR home router’s IP address must be assigned as either 192.168.1.1 or 192.168.0.1. We need to type this URL to access this: http://www.routerlogin.net or http://www.routerlogin.com into our web browser’s address bar.

If we want to login to the  router then we need to follow the following procedure that is given below:

  • First, we need to Launch a web browser from the computer or by a mobile device that is just connected to our router’s network.
  • Then after that, we need to Type this URL  www.routerlogin.net or http://www.routerlogin.com.
    then a login window will appear or we can say window will opens.
  • Then just Enter the router-specific username and the user password.
    The default username will be always admin and the default password will be password. The username and password are always the case-sensitive.
    you will see the BASIC Home screen page.

Note: If you already changed the admin user password for your router, the by default password (password) will not work longer. But sometimes you will get an error to the login and access the NETGEAR router this is because of many reasons such as: The most common reasons are browser cache and IP address issues.

Also like If you are getting an error while attempting to access the routerlogin.com or at the routerlogin.net web address, then you need to clear your using internet browser cache by using the following links:

  • Google Chrome
  • Internet Explorer
  • Mozilla Firefox
  • Apple Safari
    also just keep in mind that by Using the different browser may also help to your access error. And If you are normally using the Google Chrome, then try accessing again the router login pages from the  Internet Explorer, Apple Safari or Mozilla Firefox.

Source – How to Login Netgear Wireless Router

see if all this Information Is Helpful. Please Let us Know By Your comment if you need any help with your Netgear router login.

Thank You For Landing at Technical-care.com

Setup Belkin Range Extender Using Belkin.range

Setup Belkin Range Extender

Hi There,

In This Post, we will discuss How to setup and configure Belkin range extender.

Before we proceed further let us Tell You few facts About the Belkin range booster (Extender). Belkin extender is One of the best Range extenders if You value In Terms of Speed, connectivity, Durability altogether.

Most Belkin wireless extenders have dual band Feature Available. You Don’t Need to make the same password as you have on your router.  You Can Setup Different password in Your Belkin extender.

Setting Up Belkin Extender Can Be super simple Because It’s A Plug & Play Device. Let’s Just Go And Configure Belkin Range extender –

Setup Belkin Range Extender

In Order to set up Belkin Range Extender, You Just Need to Follow Few Steps And Get it Setup

1- First Power On Your Belkin extender And Plug it to Some power Source Near to Your Main Router.

2- Now Go to Your Computer And Please Refresh the Network List At Right Hand Bottom Of Your Computer

3- If Your Computer Does Not have Wireless Capability You Can Use an Ethernet Cable to Connect the Belkin extender with Your computer.

(Keep In Mind that Extender Con Be Setup using Any Device With Browser With Wifi Capability Without Any Ethernet Cable-  Example – Android, Windows Phone Or iPhone, iPad, tablet, etc.

4- Now You May Can See a Network name Belkin.setup To Your Network List Please Connect with it.

5- We Are Much Sure While Connecting With Belkin.setup it should Not Ask for any password as it Should Be Unsecured In The Beginning But You Can Reset the extender if it shows Password On It.

6- Now Open Your Internet Browser at Your Device Which is connected with Your Belkin Extender And Type at the Top Belkin.range Or http://Belkin.range And Press Enter.

7- Now Start setting Up Belkin extender And Follow Onscreen Instructions setup password, Network name, Guest  Network And Password (Optional).

8- You Can Turn On And Turn off Bands. What we mean is Frequency.

For Gaming Devices Like Xbox And Roku, You might need 5GHz signal For Rest of the devices  2.4 GHz is Fine. You Can Turn Both On And Functional at the same time if you Belkin extender Model Supports Dual band.

Please Save the settings And Reboot Your Computer And  Belkin extender. 

Now Your Belkin Range Extender Has Been Configured And Its Time You Go And Test the Connection.

You Can Also  Use WPS Key to Setup Your Belkin Extender.

If You Fail To Setup Belkin extender setup Please Restart Your Computer And Reset the Extender Try Installing Your Range Extender.

Reset Belkin Extender

Its Quite Easy Just Follow the steps –

Plug the Extender to the Power & Press the Reset key at the Back of Belkin extender using a Paper-Clip Or Pen & Hold if for 5-10 Seconds, When all lights on Belkin extender start Flashing Let the Reset Key Go.  Now is the time for You to Go & Re-setup Belkin extender All over again. Don’t Forget to power Cycle Your devices After Restart.

Read More on How to Reset & Setup Belkin Range Extender 

We Hope all this Information May Help You Setup And Troubleshoot Belkin extender.

Thanks

How to setup Netgear range extender through mywifiext.net?

setup Netgear range extender

Hello Friends

Welcome to the technical-care.com

This is the first articles about Netgear range extender on mine blog. We are happy to share proper solution about Netgear range extender setup.

An extender is the important part of our life and basically, an extender for internet users who like better streaming over the internet. Everybody wants to use the fast internet in daily life. But sometimes we become confused. Don’t worry. We will suggest you that which router and extender are best.  Let’s move on topics.

Setup Netgear Range Extender

Setup Netgear

  1. Unboxed Netgear range extender and plug-in your extender into a power outlet and turn on.
  2. Now, you can go for on taskbar and where you can see Wi-Fi icon in notification area click on Wi-Fi icon and select mywifiext.net name of the network.
  3. Open any web-browser in your devices and type mywifiext.net and then press enter.
  4. You can see mywifiext.net configuration portal in web-browser and where you click on new extender setup.
  5. When you will click on new extender setup, then mywifiext.net will ask you for creating an account. So, please create an account for Netgear setup.
  6. Now, select Wi-Fi range extender.
  7. The extender will show you a list of Network name. So you will select your network and click on next.
  8. Now, Manage your network name and as well as password and click on next.
  9. Save your setting. Once your setting will be saved. Please restart your devices which connected to an extender.

Know More AboutNetgear Setup And  Setup Netgear Range Extender

We Hope your Netgear Range extender is ready, Keep your extender anywhere or keep In the middle of the home. You can enjoy with your extender.

About Netgear range extender –

Network Range extender becomes more famous nowadays. Actually, Netgear range extenders are Improve Wi-Fi connection for Smartphone, game console, TV, tablets, and computer. It will also expand coverage in every corner of your office and home.

  • Netgear range extender is the plug and play device.
  • It is used in the middle of the house and office for better internet connectivity.
  • Mywifiext.net is a setup portal which manages to Netgear range extender.
  • Netgear launched many models for extender like Netgear N-300, N-600, and dual-band extender etc.

All Netgear will set up with same methods. Today, we will discuss on Netgear range extender and give you the easy way to setup extender. Follow the instruction-

Here Are Few popular Netgear extender Model –

  •          Netgear AC2200-Nighthawk X4 WiFi Range Extender

Setup Netgear

  •         Netgear AC1900- Nighthawk WiFi Range Extender

Setup Netgear

  •        Netgear AC1200- WiFi range extender

Setup Netgear

  •       WiFi Booster for Mobile Devices

Setup Netgear

  •       N300-Trek Travel Router and Range Extender

Setup Netgear

See More Netgear extender- http://www.netgear.com/home/products/networking/wifi-range-extenders/

Thank you for reading. Please share the Post and help Other People to setup Netgear Range Extender.

Comment Below And Let us know If You Need Any other Help with Setting Up Netgear Extender.