admin – Technical

Laptop keeps Disconnecting from WiFi, Here is How you fix it

May 9, 2020May 9, 2020 by admin

if you too are facing the problem of continuous disconnection of your laptop from the wifi, then don’t worry, as you are not the only one! Nowadays many users are reporting this issue of often disconnecting their laptop from the wireless network.
Why this problem of disconnection in every few minutes occur?
The continuous disconnection of the wireless network from your laptop happens because of the connection issue. Also, it won’t be easily fixed by restarting your router or restarting your laptop.
-If you are facing this problem, then you must have some issues with cable or DSL modem, router, or in your ISP. You must be having a poor wifi signal or overloaded wifi signal. To fix this issue, you need to again sign in to the network with public wifi hotspot (via login page).
-It may also occur due to wireless interference with other hotspots or other nearby devices.
-The outdated wifi drivers can also create the issue.

Fix Laptop Keeps Disconnecting

Another reason is insufficient strength if wifi hotspot, like you, are sitting at the end of the wifi range.
In crowded areas, the overloaded network issue might be faced.
The problem of channel overlapping may occur.
Outdated firmware of wireless router can also be the cause.
How to fix the issue?
Reset your router and restart your computer, it may fix the issue.
Come closer to the wifi hotspot range to see if this helps you fix wifi keeps disconnecting problem
Set your wifi at a different place, it will resolve the issue of wifi interference.
Update your wifi adapter driver and router firmware from the manufacturer’s website.
Try to connect with another network, if available, it will make sure that you were connected with bad wifi hotspot.
Disable your network adapter power-saving setting. Allow to turn off the device from the tab of power management in settings.
Increase Scan Valid Interval to fox wireless network issue.
From the ‘Advanced’ tab from the settings, change the value of Scan Value Interval to ‘120’.
If I talk about particular Windows 10, then
It can be the issue of corrupted/outdated wireless drivers.
It can be a power management issue.
If home Network marked as public.
Or, WiFi connection utility conflict.
How to fix it in Windows 10:
Mark your home network as private.
Disable WiFi sense.

These were some of the issues on how one can fix laptop keeps disconnecting problem or internet keeps dropping

Hopefully this should help you resolve the problem.

How Pirate Movie Websites Are Infecting Computer & Phones

September 22, 2020February 5, 2020 by admin

Nowadays everyone likes binge-watching. Nobody wants to pay for original content and just want to watch everything for free. Streaming online videos from the pirated video is the only last option left for TV shows and movies lovers. But have you ever thought that how it can affect your device and its performance? Does is it over when you exit the website? Actually no. The trackers keep on tracking your device, and through this online content, they release dangerous malware like Trojans in your device. This will later result in slow processing of your devices, leading you in serious troubles and will open your device for a flood of advertisement.

Note: You should know that downloading pirated content is illegal and is a breach of copyright protected act. This can lead you to have legal troubles and can lend hefty fines to you, even jail, in some cases if found in mass exploitation.

Today we will know in detail how these pirate movie websites are infecting computers and phones in a bad way!

What are pirated websites, what is pirated content, and how does it affect our devices?

Pirated websites–

The websites which provide pirated content to different users are known as pirated websites. They deliver these contents for free. They aren’t always safe to use and can spread dangerous malware through their content. You can download any kind of data such as music, games, TV shows, and other software from different pirated websites. Some popular pirated sites listed below:

The pirate bay: This website itself suggests you some best torrents, and you can use this website for any kind of content old or new.
Torlock: Top 100 torrents list to help you find some of the best content. It is best for anime music and ebooks.
Vidmate – Many people download vidmate for pc for video download and making.

there are always Website that allows you to download the illigal Movies, Songs & Shows Like Tamilrockers, Movierulz, Fmovies,123Movies Etc.

TorrentDownloads:

EZTV: This pirated website is perfect for TV shows and it is very easy to navigate.
LimeTorrents: If no other website provides the content you wanted, then probably this website is perfect for you. It is better as an alternative option.
Torrentz2: This website provides the best content of music and is very easy to use.
1337x: The sections are divided into Oscar nominations, new shows, best movies, and much more. This website provides the best torrent search options.
RARBG: If you are searching for new content, then this website is probably the best one to download it. It is a very active website, and you will find almost all the new content here.
YTS: This website is best to download classic movies and is perfect for the users. You can download classic movies with limited bandwidth.

Pirated content

A content that is copied is not original is known as pirated content. Original content is obtained from a unique website and is always sold. Users who cannot buy or don’t want to purchase content search it online on pirated sites and download it from there. It is illegal to sell and buy pirated content. If you are caught, then it can lead you to pay a hefty fine or even trip to jail in extreme cases. Many websites, in fact, spread malware through different pirated contents. It is very unsafe to download pirated content from pirated sites for your devices.

How Does it cause Danger to our devices?

Downloading or streaming movies and TV shows from pirated content is very dangerous. People think it is safe, and you finish it off after you complete the download and exit the website. But no!! Trojans and other harmful malware do not exit and enter your devices while you stream a particular TV show or a movie. Some harmful effects are:

It affects the performance of your device and, in fact, steals the data from your device.
It slows down the speed of the device and can lead you into serious troubles.
It can fill your device with a large number of ads as soon as you turn your data on. It will be a pathway for spreading the virus and dangerous malware all around.
In fact, this malware can enter other devices when you share data through portable hardware.
Also, it is illegal and can lead you in serious and dangerous troubles while you stream the content from pirated websites.

How do malware and virus spread?

The owners of the pirated movies and TV series websites spread through top shows and movies. Whenever any user downloads it, they are coming under the pray of such malware and viruses. Following are some of the most popular TV series which are used to spread malware and virus through pirated websites:

Game of thrones
The good doctor
The big bang theory
Arrow
Suits
The walking dead
Vikings
This is us
Grey’s anatomy
Supernatural

Many statistics have shown that TV shows like Game of Thrones, Arrow, and The Walking Dead are the most popular TV shows responsible for the spread of viruses and malware.
Different episodes are responsible for spreading the virus and malware. For example, the first and the last episode of game of thrones turned out to be the most infected one. The users who downloaded these two episodes mostly faced the problem of malware and reduced the performance of their devices.
Each TV show at least covered three users to attack their device through dangerous malware and virus.
Trojans are spread through the ads. The ads guarantee you of no virus website and actually have the virus, which later on attacks your device. Trojans are really dangerous malware, which can spoil your device performance and affect the data of your device.
In fact, Game of Thrones spread hazardous malware. This TV series is used by almost 500 different groups. A total of 33 types of malware are spread using Game of Thrones.
The American horror story is proved to be the most dangerous file because it covers almost three users at a time and spread perilous malware.
Out of all the pirated content, the most responsible pirated content was Game of Thrones. 17% of infected files are spread by Game of Thrones when it is downloaded from the websites which provide pirated shows and movies.

Why should we avoid using pirated websites?

It is not only dangerous for our devices but also for the actors, directors, and other people who are part of the content you download online. It does nothing but increases the costs of that movie or TV show on online platforms. Thus, streaming videos online from the pirated website is a very bad thing and you should mostly avoid it. The real content can be obtained from many legal movie streaming sites and other certified video streaming software that are only safe for watching the original content.

How can we prevent this?

Government corporations should release strict protocols so that none of their employees use these pirated websites to download illegal content. They should restrict such networks and keep their data safe by doing this. It is better for government corporations to restrict such networks so that they don’t become a significant pathway of dangerous malware and Trojans.
Strict laws should be released against this business of privacy. Law enforcement should do rigorous investigation against cyber criminals so that they avoid the troubles faced by internet users. Another fact is that the makers of the movie or limited series get lost in their business, which affects the livelihood of numerous peoples committed with the makers. If genuine and hard work of makers is not appreciated, it will later result in the loss of good content and money also.
Social platforms such as Facebook, online shopping, craigslist, and other social websites should avoid the selling of privacy devices and contents. Social platforms are also the major pathway for cybercriminals to spread dangerous malware and Trojans.
Lack of awareness is a very major issue. Users think that downloading content from pirated websites will not create any problem for their devices, and neither will lead them into any trouble. That’s not true. Pirated websites are very dangerous, and users should avoid any kind of download from such sites. Both state-level and the country-level government should warn their citizens not to use such websites and should bring some secure laws for their safety.
You can use apps like Roku and Apple TV to avoid streaming from pirated websites. There is no shortage of inline platforms that can provide you original content without any trouble.

Learn How to Watch Movies Online

Conclusion

So above was an overview of how using pirated websites can affect your device. There is no shortage of online platforms where you cannot binge watch different TV shows and movies. It is very easy to use other platforms rather than using pirated websites and indulging yourself in serious troubles, including fraud and losing hard-earned money, as regular visitors of these sites are easy targets for fraud. Nowadays using advertisement fraudsters use your device for cryptocurrency mining leading unwanted sharing of information and compromising the speed of the device. It is better to pay and watch shows instead of paying heavy fines and maybe a trip to jail. So, keep your device safe and avoid using pirated websites.

How to Login Arris Wireless Router(Modem)?

March 26, 2020February 2, 2020 by admin

Arris has been making mostly cable modems before this product.

They have been selling cable modems for over 60 years now. It is the same company that invented digital TV and brought the wireless internet into homes with their first cable modem gateway. Their modems provide exceptional download speeds that allow faster downloads, HD video streaming without buffering, online gaming with zero latency, etc.

They provide enhanced safety features to keep your network safe and secure and provides ultimate surfing experience. Let’s talk about how to set up the router, login into your web portal and various other settings.

Connecting your router to your computer

In order to connect your router with your computer, use the Ethernet cable provided inside the box. You need to connect one end of the ethernet cable to your computer’s Ethernet port and one end to the port in your modem

Login Arris Wireless Router –

Step 1. Open up your browser (Google Chrome, Firefox, Microsoft Edge).

Step 2. Enter your IP address in the address bar, which in your case will be 192.168.0.1 or 192.168.100.1 (if it does not work, your IP, username, and password will be provided on the backside of the modem).

A login prompt will pop-up, It will ask you for Username and Password. By default, the username and password will be “admin” and “password” respectively.

If these credentials don’t work, try the following credentials.

Username Password

admin admin

admin 1234

admin blank

blank blank

If the problem persists, try restarting your modem and try logging in again.

Note: These credentials may not work if your service provider has changed it. You will have to contact your service provider in that case. Source of the information – arris router login

Can’t Log In, What to do?

If you fail to login or you are facing problems with bandwidth, you don’t need to panic because just by resetting your modem to default settings will help you proceed further.

It will restore the settings of your router to the default as it came out of the box.

After resetting, your login or bandwidth problem should be fixed. Now try logging in with the default username and password. (written on the box or on the back of the modem)

How to Factory Reset Arris Wireless Router?

Note: Resetting your modem will wipe all your settings like network name and password.

There are two ways by which you can reset your wireless router. Let’s go through them one by one:

Using Reset Button

Generally, at the backside of your modem, there should be a reset button. 2. When you locate the button press and hold the reset button using a pointed object like a

pen or paper pin. 3. Hold the reset button for 12-15 seconds. Doing this will make your router reboot. 4. When the router reboots, it means that the router has been restored to factory settings.-

This may take a few minutes.

Even after completing all the steps above, if you are unable to reset factory settings, then try the second method given below:

Reset using the web interface

You can log in to your Arris wireless router by going to one of the following addresses:

a. http://192.168.100.1

b. http://192.168.1.1

c. http://192.168.254.254 2.

Go to the section named as Security or Utilities (the name of this tab can vary model to model)
Look for the option to factory reset the device to default settings and click on it to begin the process.
Wait a few minutes for your modem to reset.

Congratulations your router has now been reset to default settings. What next, you ask?

Now as your router is back to default settings, you will have to set it up for your own use, so let’s talk about that next.

Setting up Initial Wireless settings

For setting up the wireless settings of your modem, you need to log in to the web portal as mentioned above.

It will ask you for the username and password and you can use the default ones as explained above. After you’ve successfully logged in, do the following steps:

Step 1. Ensure to check Enable Wireless checkbox.

Step 2. Choose an easy name for your network (that you can easily remember) and put that name in Wireless Network Name(SSID)

Step 3. To make sure that your network is visible to connect, check the Broadcast Network Name(SSID) checkbox.

Step 4. Set Tx Power Level to “High” for faster transaction speeds.

Step 5. For Channel, choose “Auto”.

Step 6. Choose your preferred language, by default, it will be “English”.

Step 7. Choose the right security model for your network: Choose WPA-WPA-2PSK** as it is the most advanced security protocol available as of now.

Step 8. Encryption Algorithm should be set to “TKIPAES”.

Step 9. Setting up a password for your wireless network: To set a password for your network, type in your desired password in the Pre-Shared Key field. Try setting a difficult password for your network, but make sure to remember it.

Step 10. Click on the WPS Enable checkbox to ensure the security of your network is active.

Step 11.Go to Encryption Mode and set Encryption Mode to PBC.

Step 12. Click the Apply Button. Your router should be successfully configured now.

Note: Some devices may not be compatible with these settings, you may need to downgrade the security to WPA-PSK or WEP in order to support those devices.

How to Reset Password on Arris Wireless Modem?

Default passwords are often very easy and people can easily get access to your network. But you don’t want that, do you? So you need to change your password to add a little bit more security to your network.

Note: You need to be connected to your network via an Ethernet cable or Wireless network.

1. Login to your Arris wireless router using the web portal as explained before.

2. Search for Security settings(Location of these settings may vary for different models),

Try to locate these settings in the sidebar.

3. Look for a Field named as “Pre-shared Key”

4. Enter your new password in the “Pre-shared key” field.(try to make your password more

complex, but easy to remember).

5. You might be asked to enter your password again.

a. Tips for setting a strong password

i. Add special characters. ii. Use Upper case and Lower case characters. iii. Avoid Using Commonly used words. 6. Save your password by clicking on the “Save” button. After saving the changes, restart your device.

FAQ

Does Arris Modem have Wi-Fi? Arris provides DOCSIS 3.0 standard, SURFboard WiFi cable modem that is perfect for streaming 4K Ultra-HD video content, virtual reality gaming with zero latency.

How to Extend my Wi-Fi range?

● Select a Good Place to put your modem.

● Keep your router updated.

● Cut Off unwanted connected devices.

● Buy a Wi-Fi repeater/Extender.

● Try Switching WiFi channels.

● Stop Bandwidth hungry apps and clients

● Switch to 5GHz band.

Conclusion

After going through the instructions, it won’t be that hard for you to log in and configure the Arris Wireless router. We hope we helped you configuring the router and made the process a little easier for you.

Leave feedback in the comments if we were able to help you. Also, If you have any questions regarding logging-in or setting up the router, feel free to ask in the comments.

Canon Printer Common Problems & Solutions

December 27, 2019December 27, 2019 by admin

We are living in the paperless world still the days today official operations are incomplete with the printer. There are several types of printers and their brands are available in the market. Canon printer is one of the most used and affordable printer brands. Canon printers are the best suits for personal as well as commercial purposes.

With the advance features of the canon printer, users are also facing some technical problems or errors in it. This article provides quick solutions to common canon printer’s problems faced by the users. Users who experienced any kind of issues related to the canon printer can refer to this article to resolve the issue. to Download the driver & software package for canon, Printer go to http://canon.com/ijsetup & get the correct version of canon driver & manual to install canon printer

Some troubleshooting tips:

The continuous printing jobs for long hours most of the time cause the problem printers to stop working in the middle due to overheating. In such cases the user can turn off the printer, wait for some time at least for 30 minutes and start printing again.

If the computer system is unable to communicate with the canon printer unit then a user might get the printer not responding error with their printer. Users can use the following steps to fix the canon printer setup error.

Check id canon printer is properly connected with the power outlet also check if the power cable between printer and computer system is properly connected or not.
Connect the USB cable to another USB port and test the printer for error.
Use another USB cable for connecting printer and computer system.
The users who are using the network printer should check for their internet connection. Poor connection often causes the printer not responding problems.
The user who connects their system with a printer via Bluetooth should place the printer close to the computer system. Repair it again and test the printer for error.

Printer not responding:

Here are the steps which can assist the user to fix the canon printer not responding issue from the printer unit.

Press the setup button on the printer unit.
Click on the wireless LAN setup option from the available menu and click on the ok button.
Go to an easy setup option.
Click on ‘access point connection (recommended)’ when it asks for the wireless LAN connection method.
Enter the password for your wireless network.
Insert the setup disk on following on-screen instructions to install it.
Select easy install to install it in the device.
Complete the installation process which might take a few minutes and test the printer.

Slow printer:

Slow printing is the most frustrating scenario with canon printer users. The user often faces the slow printer issue when they are trying giving high-quality output files for printing. Users can simply reduce the print quality for the rapid printing operation. Users can omit the graphics while printing files from the websites for fast printing.

Users can also turn on the draft model of the canon printer which improves the printing speed and saves the printer ink.

Paper jam error:

Printer jam error is frequently experienced by all the canon printer users. Users can follow given steps to fix the canon printer paper jam error.

Turn off the printer unit and remove the power cable from the plug immediately.
Test the printer carriage if it can move the right side of the printer.
If it is unable to move and stuck between then the user can take out the ink cartridges from the printer.
Takeout the printer pages from the printer without removing the printer tray.
Open the backside door of the printer.
Turn printer roller to upward direction thrice and close the rear side of the printer properly.
Place the ink cartridges back to their place and turn on the printer unit.
Check the printer for error by providing test print.

Printer prints half page issue:

Users can execute the following steps sequentially on their computer system if they notice their canon printer prints only half pages.

Go to start-> Run.
It will open the run window type services.MSC on it and hit the enter button.
User can see the services window on the screen.
Search for print spooler on the list.
Click on the stop option by right clicking on that entry.
Keep that window open. Click on the start icon again.
Go to My Computer and navigate to print spool folder which is probably at C\WINDOWS\system32\spool\PRINTERS.
Delete all the files in this folder to delete the pending jammed print queue.
Open the services window again and start the printer spooler service again.
Test the printer by providing a test print.

No paper alert:

In this users will get the no paper alert from printer even if there are pages in the paper tray. Users can follow given steps to fix the no paper alert in the canon printer.

Users should provide the printing pages in the correct size which is recommended by the canon printer.
Make sure that all the pages are in good condition without any wrinkled sheets or damaged corners.
Open the rear end of the printer and check if any page is stuck between the printer rollers. Remove the jammed paper if found any.
Clean the printer rollers properly with the help of compress air or cleaner.
Test the printer for no paper alert.

Unclear or faded printing:

Users can check their printer head nozzles are open or not. Users should clean their printer heads if the nozzles are not open. The printer head clogged often leads to such type of issue.

Make sure that all the ink cartridges are installed properly or not. Users should also check their ink cartridges there might be the possibility that they are running out and user need to replace it by the new one.

We hope that all the above solutions will assist the user to fix their issue which canon printers. Users should update their printer drivers regularly to minimize their error frequency. For further assistance, the user can directly get in touch which the canon printer technical support team.

How to Login Any Wireless Router

November 12, 2019November 7, 2019 by admin

Logging in to your router can be a hassle if you are a tech noob. I also had to face a lot of problems when I decided to log in to my router to change the password of my router or for something else.

First, let’s talk about why you would want to log in to your router:

1- to change the password of your router and the wifi internet.

2. To extend the existing network to cover a larger area with your wifi.

3. To change the QoS (quality of service) settings to allocate different bandwidth to different applications and devices.

4. To use the Dynamic DNS feature to allocate a new address to your computer when you want to host a server.

5. To access the web interface of your router.

6. To check who all are connected to your router. This can be done by clicking on the “connected devices” button on the general status page.

7. To change the DNS server for your entire network on your router.

8. Routers have parental control features that allow website blocking for different devices. Then you can also control the timing when internet access is disabled for a particular device. This will help you to stop your child from using the internet late at night.

Now that we know why we would want to login to a router, let’s talk about how to login to routers like D-Link, Linksys, Belkin, Asus, and Netgear. They have a login process which is quite similar. So if you follow the given process then you will be able to log in most of the routers.

login router Dashboard –

1: Connect the router to the computer using the Ethernet cable.

2: Then open your favorite browser. It can be Google Chrome, Internet Explorer, Firefox or for that matter any browser you want.

3: In the address bar in your browser, enter the default IP address of your router. The default IP address of most of the routers is 192.168.1.1. Enter this IP address and press enter.

Question: How to find the default IP address of your wireless router?

Answer: Generally the default IP address of a router is 192.168.1.1 Or 192.168.0.1 If this doesn’t work, you can visit the website of your routers make, and directly get to the GUI of setup console page.

4: Once you enter your IP address in the address bar of the router and press Enter, then a new page will open in the browser which will ask you to enter your username and password.

You can try this combination of username and password:

Username = admin , Password = admin.

If even after using this combination you are not able to log in, that means that you must have changed the password and have forgotten it. Most routers don’t have the facility of recovering the lost password. But you can reset the router.

Resetting the password is the subject of a different article. It is a complex process. There are two ways called the Soft Reset and the Hard Reset. A soft reset is used when the password is being changed for the first time and the hard reset method is used when the password is being reset for the second or any number of times.

Now we know how to log in to a router. Now you can solve any problem you have related to your router by logging in and accessing the web interface of your router.

How to Login Netgear Wireless Router ?

March 5, 2018December 14, 2017 by admin

Hi Everybody

Today we Are Going to assist with Your Netgear Router And How You Can Login Netgear Router. Once Login You will be able to adjust the Netgear router settings. like password, network name, channel settings, parental control etc.

As by an automatically(default), each and Every NETGEAR home router’s IP address must be assigned as either 192.168.1.1 or 192.168.0.1. We need to type this URL to access this: http://www.routerlogin.net or http://www.routerlogin.com into our web browser’s address bar.

If we want to login to the router then we need to follow the following procedure that is given below:

First, we need to Launch a web browser from the computer or by a mobile device that is just connected to our router’s network.
Then after that, we need to Type this URL www.routerlogin.net or http://www.routerlogin.com.
then a login window will appear or we can say window will opens.

Then just Enter the router-specific username and the user password.
The default username will be always admin and the default password will be password. The username and password are always the case-sensitive.
you will see the BASIC Home screen page.

Note: If you already changed the admin user password for your router, the by default password (password) will not work longer. But sometimes you will get an error to the login and access the NETGEAR router this is because of many reasons such as: The most common reasons are browser cache and IP address issues.

Also like If you are getting an error while attempting to access the routerlogin.com or at the routerlogin.net web address, then you need to clear your using internet browser cache by using the following links:

Google Chrome
Internet Explorer
Mozilla Firefox
Apple Safari
also just keep in mind that by Using the different browser may also help to your access error. And If you are normally using the Google Chrome, then try accessing again the router login pages from the Internet Explorer, Apple Safari or Mozilla Firefox.

Source – How to Login Netgear Wireless Router

see if all this Information Is Helpful. Please Let us Know By Your comment if you need any help with your Netgear router login.

Thank You For Landing at Technical-care.com

Setup Belkin Range Extender Using Belkin.range

September 11, 2020October 11, 2017 by admin

Hi There,

In This Post, we will discuss How to setup and configure Belkin range extender.

Before we proceed further let us Tell You few facts About the Belkin range booster (Extender). Belkin extender is One of the best Range extenders if You value In Terms of Speed, connectivity, Durability altogether.

Most Belkin wireless extenders have dual band Feature Available. You Don’t Need to make the same password as you have on your router. You Can Setup Different password in Your Belkin extender.

Setting Up Belkin Extender Can Be super simple Because It’s A Plug & Play Device. Let’s Just Go And Configure Belkin Range extender –

Setup Belkin Range Extender

In Order to set up Belkin Range Extender, You Just Need to Follow Few Steps And Get it Setup

1- First Power On Your Belkin extender And Plug it to Some power Source Near to Your Main Router.

2- Now Go to Your Computer And Please Refresh the Network List At Right Hand Bottom Of Your Computer

3- If Your Computer Does Not have Wireless Capability You Can Use an Ethernet Cable to Connect the Belkin extender with Your computer.

(Keep In Mind that Extender Con Be Setup using Any Device With Browser With Wifi Capability Without Any Ethernet Cable- Example – Android, Windows Phone Or iPhone, iPad, tablet, etc.

4- Now You May Can See a Network name Belkin.setup To Your Network List Please Connect with it.

5- We Are Much Sure While Connecting With Belkin.setup it should Not Ask for any password as it Should Be Unsecured In The Beginning But You Can Reset the extender if it shows Password On It.

6- Now Open Your Internet Browser at Your Device Which is connected with Your Belkin Extender And Type at the Top Belkin.range Or http://Belkin.range And Press Enter.

7- Now Start setting Up Belkin extender And Follow Onscreen Instructions setup password, Network name, Guest Network And Password (Optional).

8- You Can Turn On And Turn off Bands. What we mean is Frequency.

For Gaming Devices Like Xbox And Roku, You might need 5GHz signal For Rest of the devices 2.4 GHz is Fine. You Can Turn Both On And Functional at the same time if you Belkin extender Model Supports Dual band.

Please Save the settings And Reboot Your Computer And Belkin extender.

Now Your Belkin Range Extender Has Been Configured And Its Time You Go And Test the Connection.

You Can Also Use WPS Key to Setup Your Belkin Extender.

If You Fail To Setup Belkin extender setup Please Restart Your Computer And Reset the Extender Try Installing Your Range Extender.

Reset Belkin Extender

Its Quite Easy Just Follow the steps –

Plug the Extender to the Power & Press the Reset key at the Back of Belkin extender using a Paper-Clip Or Pen & Hold if for 5-10 Seconds, When all lights on Belkin extender start Flashing Let the Reset Key Go. Now is the time for You to Go & Re-setup Belkin extender All over again. Don’t Forget to power Cycle Your devices After Restart.

We Hope all this Information May Help You Setup And Troubleshoot Belkin extender.

Thanks

How to Setup Norton Antivirus Retail Card ?

March 5, 2018September 30, 2017 by admin

Hi There,

Would You like to Activate And Setup Norton Antivirus Product?

If You Said Yes Than Lets Go And Help You Install Norton Antivirus Protection.

First Follow these Steps In Order to Explain you Throughout Installation of your Norton Antivirus.

Get to Know Helpful Guide (Pre-installation ) Before Installing Any Antivirus Protection

Please Understand- What To Do Before Installing Any Antivirus Product

Now Let’s Go And Activate Your Norton Product –

First Open Your Browser And Type www.norton.com/setup Or Visit My Norton Account
Now go And Login with your Norton Account And Enter Your Product Key.
If You Already had Norton Account Please Login using Your Registered Email And Password Associated with Norton. (You Can Always Reset The Password And Recover the Account ) Learn More About www.norton.com
Now Go to Your Account >Services And Select Your Product that You have Bought.
Select Your Platform Like windows, Mac Or Whatever You have.
Download Your Norton Antivirus And Run the application
Install the Norton antivirus using the on-screen Instructions.
After setup Please Restart your Computer And See if your System has Taken the installation of your Norton antivirus.
Do Not Forget to Update Your Norton Protection And Keey The Conformation Email Or Product Key In Case you need that in the feature.

See Norton antivirus is one of the best antivirus Available in the market for home And Business Users.

Tips –

Try Not Installing Norton from third Party Website they May can steal your Product code.

It’s available in many platforms such as windows, mac, i.o.s And Android etc. One Can Get Norton Endpoint Protection for Thier Home And Business Devices. If Your Installation Failed You Can Try Doing Same Again Steps After uninstalling Norton.

We hope Now your Norton Antivirus Has Been Installed. Please Comment and let us know if you need more help with Norton setup.

Good Luck

How to setup Netgear range extender through mywifiext.net?

March 5, 2018September 26, 2017 by admin

Hello Friends

Welcome to the technical-care.com

This is the first articles about Netgear range extender on mine blog. We are happy to share proper solution about Netgear range extender setup.

An extender is the important part of our life and basically, an extender for internet users who like better streaming over the internet. Everybody wants to use the fast internet in daily life. But sometimes we become confused. Don’t worry. We will suggest you that which router and extender are best. Let’s move on topics.

Setup Netgear Range Extender

Unboxed Netgear range extender and plug-in your extender into a power outlet and turn on.
Now, you can go for on taskbar and where you can see Wi-Fi icon in notification area click on Wi-Fi icon and select mywifiext.net name of the network.
Open any web-browser in your devices and type mywifiext.net and then press enter.
You can see mywifiext.net configuration portal in web-browser and where you click on new extender setup.
When you will click on new extender setup, then mywifiext.net will ask you for creating an account. So, please create an account for Netgear setup.
Now, select Wi-Fi range extender.
The extender will show you a list of Network name. So you will select your network and click on next.
Now, Manage your network name and as well as password and click on next.
Save your setting. Once your setting will be saved. Please restart your devices which connected to an extender.

Know More AboutNetgear Setup And– Setup Netgear Range Extender

We Hope your Netgear Range extender is ready, Keep your extender anywhere or keep In the middle of the home. You can enjoy with your extender.

About Netgear range extender –

Network Range extender becomes more famous nowadays. Actually, Netgear range extenders are Improve Wi-Fi connection for Smartphone, game console, TV, tablets, and computer. It will also expand coverage in every corner of your office and home.

Netgear range extender is the plug and play device.
It is used in the middle of the house and office for better internet connectivity.
Mywifiext.net is a setup portal which manages to Netgear range extender.
Netgear launched many models for extender like Netgear N-300, N-600, and dual-band extender etc.

All Netgear will set up with same methods. Today, we will discuss on Netgear range extender and give you the easy way to setup extender. Follow the instruction-